|
How
Does It Work?
Concentrated chemical is pumped from the Chemical container
on command from the machines controller to a mixing point
with clean water from the solution tank. A proportioning
valve regulates the mixture by command from the controller.
What
Does It Do? Automatically mixes concentrated chemicals
stored in an on-board container with clean water stored
in the machines solution tank, and delivers the mixed solution
to the brush deck for scrubbing application. Concentrate
is mixed at an operator preset amount of zero to 3.5 ounces
per gallon. The machine control maintains this proportion
through the full range of the machines solution setting.
What
Does the Operator Do? The concentrate container holds
enough chemical to last for several tanks of water. The
operator should simply fill the concentrate tank with the
appropriate chemical at the beginning of the shift, and
check to see that the concentrate knob is set to the associated
color setting for the required ounces per gallon proportioning.
Then fill the solution tank with clean water. No measuring
or math is required.
- Consistent
mixing - no chemical waste.
- Achieving
the consistent required cleaning results without rework
or penalty.
-
Faster filling time over wall mount mixing units.
- Eliminate
unnecessary trips back to a refilling area where the concentrate
is located, just fill the solution tank where water is
available.
|
